3.6V Multi-function Electric Dremel Engraving Mini Drill Grinder polishing machine Variable Tool with 43pcs Power Tools

3.6V Multi-function Electric Dremel Engraving Mini Drill Grinder polishing machine Variable Tool with 43pcs Power Tools

Product parameters

Brand Name: WEIJIA

Type name: Cordless mimi Drill

Voltage:3.6V

Battery: Li-ion 1300mAh

Chuck size: 1.0/2.4/3.0/3.2mm

Speed: 18000r/min

Charging time:3-5hours

Features:

1. Low vibration

2. High torque

3. Light weight ergonomic design

4. High-performance Lithium-ion battery

5. Gun-type grip design comfortable angle changing

6. Charging cradle and accessories slot integrated design

For Safe Use:
1.  Wear safety goggles to protect your eyes.
2.  When you finish using the unit, switch off the motor and ensure that all moving parts have come to a complete standstill.
3.  Before using additional accessories not included in this set, always compare the maximum allowed RPM of that specific accessory with the RPM of this tool.
4.  In case o electrical or mechanical malfunction, immediately switch off the tool.
5.  Do not activate switch when changing accessories.
6.  Never use the shaft lock when toll is running.
7.  Ensure that the collet size corresponds with the shaft size of the accessory.
8.  Store tool in locations where temperature will not exceed 50 degrees Celsius.

How to Change Accessories:
1.  Switch drill of and make sure not to accidentally switch on while changing accessories.
2.  Press down on the Chuck Lock Button. Then you can loosen and pull off the Chuck Nut by turning it anti-clockwise. Under the chuck nut is one of the Collets.
3.  Choose the correct size Collet for the accessory you want to use and insert into place. Replace the Chuck Nut but do not tighten completely.
4.  Insert the accessory into the Chuck Nut.
5.  While pressing down on the Chuck Lock Button, tighten the Chuck Nut by turning clockwise.