Description
NEWONE 20V 3/8-Inch Cordless Impact Drill/Screwdriver with max torque 40N.m
NEWONE 20V 115mm Cordless Angle Grinder |
All copper motor |
Stepless speed change |
Positive and negative regulation |
High power motor |
Specifiations: |
||||
Model: | TC8303 | Model | TD8815 | |
Voltage: | 20V | Voltage | 20V | |
Chuck size: | 10mm (3/8-inch) | Wheel Dia. | 115mm22mm | |
No-load speed: | 0-400/0-1600RPM | No-Load Speed | 8500RPM | |
Impact Rate: | 2 Mode | 2 Position side handle | ||
Torque: | 40Nm | Spindle Thread | M14 | |
Clutch setting: | 19+2 | Cutting Ability | Stee bar/tube dia.10mm | |
Applications: | Drilling/screwing | Applications | Cutting/Grinding | |
Battery Capacity: | 2.0AH/4.0AH | |||
Charing Input: | 100-240V AC 50/60Hz |
Product parameters | |||
|
|||
①10mm Chuck | ②Torque adjustment Ring | ③High/Low Speed selector | ④ON/OFF switch Trigger |
⑤Battery pack | ⑥Forward/Reverse knob | ⑦LED Work light | ⑧Buckle |
|
|||
①Lock lever for protection guard | ②Spindle lock button | ③Main handle | ④On/Off switch |
⑤Battery Pack | ⑥ Guard | ⑦Grinding disc (not included) | ⑧Lock button |
PRODUCT FEATURES |
TC8303 IMACT DRILL |
Torque Selection Adjust the torque ring to select the mode for screwing/drilling on different materials. |
|
2 speed gearbox Low speed with high torque for all screwing jobs. Hight speed for drilling works.
|
|
Stepless ON/OFF Switch and lock button Press the switch to adjust the rotation speed and Lock/release it with the locking button. |
|
LED WORK LIGHT Drill start with LED work light which helps the operator work in dark environments |
|
Application scenario |
|
TD8815 ANGLE GRINDER
|
|
Spindle lock quick change system Hold the spindle lock to replace the grinding plate, convenient andquick |
|
Safety lock button switdh
The switch is double locked, So as to avoid fingers to hold |
|
Fast heat dissipation
smooth air flow and effective dust prevention |
|
Powerful motor
The powerful motor provides stable and durable |
Application scenario |
Installation display | ||
The operation display of Replacing the saw blade | ||
1. Press the spindle lock |
2. Use a wrench to loosen the plate |
3. Put the grinding plate into the spindle and tighten it that is complete. |
Reviews
There are no reviews yet.